ECLIPSEFRESNELJTW
14
3.5 DMX CONFIGURATION
ECLIPSEFRESNELJTW has several DMX channel configurations that can be accessed from the control panel.
• Press the button MENU so many times until the display shows
Connect,
then select throught the buttons
UP/DOWN
DMX Channel
, then press the button ENTER.
• Select the desired DMX configuration (
1CH, 2CH, 5CH1, 5CH2, 7CH1, 7CH2, 9CH, 12CH, 13CH, 16CH, 19CH, 21CH
)
through the buttons UP/DOWN.
3.6 LINKING
1. Connect the DMX OUT output of the main unit to the DMX IN input of the first secondary unit using a
5-pin XLR cable.
2. Connect the DMX OUT output of the first secondary unit to the DMX IN input of the second secondary
unit, etc.
3.7 SCREEN
It is possible to modify the following parameters, related to the display, following the same procedure:
• Press the button MENU to enter the menu mode.
• Press UP/DOWN button to scroll through the menu, select
Set Up
, then press the ENTER button to access
the next menu.
• Press UP/DOWN button to select
Screen
and press the ENTER button to proceed.
• Select the proposed option and press the ENTER button to confirm.
-
Backlight
- Auto Off display backlight. This function allows you to switch off automatically the back-
lighting of the display after a certain time which can be set using the directional keys. To have the
display always on select
On
or set a value between those shown (
10s, 20s, 30s
) to turn off the display
once the chosen time has elapsed, after exiting the menu.
-
Flip Display
- Display orientation. This feature allows you to rotate the display by 180 ° to get a better
view of the display when the unit is hanging upside down. Select
Yes
to activate the function,
No
to
deactivate it.
-
Key lock
- With this function, you can lock the keys on the control panel to prevent, for example, tam-
pering with the settings. If this function is activated, the keys are locked automatically. To disable or
temporarily disable or disable the key lock function, press the keys in the following order to regain
access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select
Yes
to activate the function or
No
to deactivate it.
• Press the ENTER button to confirm the selection.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.8 ADVANCED
You can change the parameters for the device by following these steps:
• Press the button MENU to enter the menu mode.
• Press UP/DOWN button to select the
Advanced
. Press the ENTER button to confirm.
• Press UP/DOWN button to select the desired option and press the ENTER button to confirm:
-
Full On Mode
- Select the
Full on Mode
function to set the
HB
mode (High Brightness Mode, with the
- maximum value of the colours) or
Studio
mode with a automatic white balance.
-
Dimmer Mode
- Adjusting the dimmer. Enter in
Dimmer Mode
to select specific dimming curve.
Particularly when set:
•
Off:
The increase in light intensity is linear.
•
Dimmer 1:
dimmer curve with low fade.
•
Dimmer 2:
dimmer curve with medium fade.
Содержание ECLIPSEFRESNELJTW
