ProLights CONFETTIGUNNER, Руководство пользователя

Страница: 10 / 20

coNfEttigUNNER
8
Connect a power cable to provide the CONFETTIGUNNER with 230V~ 50/60Hz. You can connect several
CONFETTIGUNNER to each other by using a power loop cable.
NOTE
Only use grounded electricity sockets!
Ensure that the power cable is not connected to the power supply when it is put in the CONFETTIGUNNER.
Test the working of the CONFETTIGUNNER by connecting the power cable to the power supply. As soon
as the blue LED-light above the CONFETTIGUNNER lights up you know that the CONFETTIGUNNER is
properly connected. After testing, make sure that the power cable is no longer directly connected to
the power supply.
During testing, make sure that no electric cannons are connected to the CONFETTIGUNNER.
Place the electric cannon in the cannon holder.
NOTE
The electric cannon can detach itself through
the pressure that is released during the shooting.
Therefore always use a Cannon Clamp to secure
it to the CONFETTIGUNNER. This is especially
important when using it in a truss.
Secure the electric cannon with a screw nut
which is situated on the side of the holder.
NOTE
Never turn the screw nuts tighter than necessary.
This can damage the pressure pattern in the
electric cannon.