ProLights BATWASHIR, Руководство пользователя

Страница: 20 / 24

bATwASHiR
8
3.2 OPERATION THROUGH THE IRC CONTROLLER
To control the BATWASHIR with the infrared remote control make sure to point the controller directly at
the receiver on the product.
Manual Color Control
To choose a specific color with the controller:
1. Press any number between 0-9 to choose your color.
To manually control the R, G, B, A, UV or W percentage:
2. Press MANUAL on the controller.
3. Press R, G, B, A, UV or W to choose your color.
4. Press + or – to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press STROBE on the controller.
2. Press + or – to increase or decrease the strobe rate.
3. Press STROBE again to turn off the strobe.
To change the switching effect of the program:
• Press FADE/SNAP on the controller.
• Fade will slowly switch the effect. Snap will rapidly switch the ef-
fect.
To black out the lights:
• Press BLACK OUT on the controller.
• This will turn off all the lights until the button is pressed again.
NOTE - The controller will not respond to any inputs when Black
Out is activated. If the remote does not respond when a button is
pressed, try pressing BLACK OUT. You may have inadvertently acti-
vated BLACK OUT.
Fig.4
IRC REMOTE
BLACK
OUT
AUTO
STROBE SPEED
SOUND
SENSI-
TIVITY
%
MANUAL
FADE
SNAP
R G B
+
0
1 2 3
4 5 6
7 8 9
A
UV W
Automatic Mode
Automatic Mode will enable you to run the automatic programs on the product.
To turn on Automatic Mode:
1. Press AUTO on the controller.
To adjust the speed of the automatic program:
2. Press SPEED on the controller.
3. Press + or – to either increase or decrease the speed of the program.
Sound Active Mode
Sound Active Mode will enable the product to respond to the music.
To turn on Sound Active mode:
1. Press SOUND on the controller.
To adjust sound sensitivity in Sound Active mode:
2. Press SENSITIVITY on the controller.
3. Press + or – to either increase or decrease sound sensitivity.