ProLights Astra Hybrid420IP Скачать руководство пользователя страница 6

PROLIGHTS - Astra 

Hybrid420IP

04

Do not stare at the operating light source

•  Do not look directly at the LED source during operation. It can be harmful to the eyes 

and skin.

• 

During Installation, operation and maintenance, be prepared for the fixture to light 

and move suddenly when connected to power.

•  The device should be positioned so that prolonged staring into the luminaire at a 

distance closer than 4.439 m (14.563 ft) is not expected.

 

Minimun

distance

Risk

Group 2

Risk

Group 1

 

0.2 m

0.7 ft

4.439 m

14.563 ft

Disposal

• 

This product is supplied in compliance with European Directive 2012/19/EU – Waste 

Electrical and Electronic Equipment. (WEEE). To preserve the environment please 

dispose/ recycle this product at the end of its life according to the local regulation.

The product contains a lithium ion battery

•  Don't throw the unit into the garbage at the end of its lifetime.
• 

Make sure to dispose according to your local ordinances and/or regulations, to avoid 

polluting the environment!

•  The packaging is recyclable and can be disposed.

The products to which this manual refers comply with:

• 

2014/35/EU - Safety of electrical equipment supplied at low voltage (LVD);

• 

2014/30/EU - Electromagnetic Compatibility (EMC);

• 

2011/65/EU - Restriction of the use of certain hazardous substances (RoHS);

• 

2014/53/EU - Radio Equipment Directive (RED).

The products to which this manual refers comply with:

• 

UL 1573 + CSA C22.2 No. 166 - Stage and Studio Luminaires and Connector Strips.

• 

UL 1012 + CSA C22.2 No. 107.1 - Standard for power units other than class 2.

FCC Compliance:

•  This device complies with Part 15 of the FCC Rules. Operation is subject to the fol

-

lowing two conditions:

3.  This device may not cause harmful interference, and

4.  This device must accept any interference received, including interference that may 

cause undesired operation.

Other approvals

•  The product meets the safety requirements of the certification procedures of the 

market in which it is placed and sold.

Содержание Astra Hybrid420IP

















































Отзывы: