ProLights ARIA 700SPOT, Руководство пользователя, Страница: 37 / 52

11 ARIA700SPOT
3.5 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.6 CONNECT
DMX ADDRESSING
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the Address and press the ENTER key.
• Press the arrow keys to select the desired value ( 001-512 ).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
DMX MODE
The ARIA700SPOT has 5 DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Mode
and press ENTER to confirm your
choice.
• Use the UP/DOWN button to select the desired DMX channel configuration ( Standard, Extended, Basic-8bit,
Basic-16bit, User ), then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The tables on page 19 show the mode of operation and their values DMX.
The unit is equipped with 3/5-pole XLR connections.
WIRELESS
To enable wireless control mode, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu Wireless .
• Press the UP/DOWN button to scroll through the menu, select Receive on/off and press ENTER to activate
the wireless mode.
• Press the UP/DOWN button to scroll through the menu, select
Reset Connect
to reset the wireless con-
nection of the unit.
ARTNET
To enable Artnet mode, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu Ethernet .
• Press the UP/DOWN button to scroll through the menu, select Universe, Start Channel, IP Address and press
ENTER to activate the mode.