ProLights ARCLED1107UV, Руководство пользователя

Страница: 24 / 36

ARCLED1107UV
8
3.3 Operation in automatic mode
If no DMX control signal is present at the jack DMX INPUT (3), and the unit independently runs through its
show programme.
• Set DIP switch [12] to the position ON.
• Use DIP switches [1 - 5] to select 10 auto programs Auto [0 - 9]:
The programs Auto [0 - 9] is set as a binary number by means of DIP switches [1 - 5]. Thus, it appears the
addition values of DIP-switches positioned to ON.
Examples: Auto [0], Auto [3], Auto [9]:
DIP Switch
[1]
DIP Switch
[2]
DIP Switch
[3]
DIP Switch
[4]
DIP Switch
[5]
Value = 1 Value = 2 Value = 4 Value = 8 Value = 16
Fig.7 Auto [9] program: switches [1] and [4] set to ON.
Value
16
8 4 2
1
Fig.6 Auto [3] program: switches [1] and [2] set to ON.
Value
16
8 4 2
1
Fig.5 Auto [0] program: switches [1 - 5] set to OFF.
Value
16
8 4 2
1
NOTE. When the fixture is on Auto mode, it will be automatic set as master fixture, the rest linking fixtures
should be set as slave mode, and all fixtures must be disconnect with the DMX controller.