ProLights ARCHITAINMENT ARCLED7314TRI, Руководство пользователя

Страница: 40 / 48

ARCLED7314TRI
16
3.14 Basic instructions for DMX operation (TOUR)
MASTER DIMMER
• CH1 controls the intensity of the currently projected color.
• When the slider is at the highest position (255) the intensity of the output is the maximum.
RED, GREEN AND BLUE COLOR SELECTION
• CH2, CH3 and CH4 control the intensity ratio of each of the red, green blue and white.
• When the slider is at the highest position (255) the intensity of the color is the maximum.
• CH2, CH3 and CH4 can be combined together to create over 1 million colors.
COLOR MACROS
• CH5 selects the required color macro.
• CH5 has priority over CH2, CH3 and CH4.
• CH1 is used to control the intensity of the color macro.
STROBE
• CH6 controls the strobe of CH1 to CH5.
ID ADDRESS SELECTION
• CH10 is used to select the target ID address.
• Each independent DMX address may have up to 66 independent ID addresses.
• An ID address of 0 will activate all ID address locations.
AUTO
• CH7 selects the preset AUTO programs AT.01-AT.10 or the custom AUTO programs PR.01-PR.10 .
• When activating the custom AUTO programs PR.01 to PR.10 then it is possible to control the STEP TIME
and FADETIME using CH2 and CH3 respectively.
• CH7 has priority over CH2, CH3, CH4, CH5 and CH6.
DIMMER SPEED
• CH9 is for selecting the dimmer mode and dimmer speed. When DIMMER is set to OFF, then RGBW and
MASTER DIMMER are linear. The Dim1/2/3/4 are different speed of the non linear dimmer.