ProLights 6 BEAM, Руководство пользователя

Страница: 24 / 32

6 BEAM
8
3.4 AUTOMATIC
The fixture has preprogrammed chases that may be triggered without a controller. Access these options
via the control panel on the back of the fixture.
• Remove any DMX controller from the fixture.
• Press the button [MENU] until appears on the display [P--], and press the button ENTER to confirm.
• Using the button UP/DOWN to select the desired program [P1 - P10] , and press the button ENTER to
confirm
• Using the button UP/DOWN, select the desired run speed (slow-fast) [S1 - S100]
• Press ENTER button to save the setting.
3.5 SOUND ACTIVE
• Press th button [MENU] so many times until the display shows [SoUd], then press th button ENTER.
• Use the microphone sensitivity adjustment knob (5) to adjust the fixture to react to the beat of the
music
• Press the button ENTER to confirm.
MAIN FUNCTION SELECTION1 SELECTION2 DESCRIPTION
DMX Mode
Addr
DMX Operation
d001 - d512 Select the DMX starting address
Slave operation SLAU Set Slave mode
Invert
H
NO - YES
Invert the operation (pod 1 becomes pod 6)
Select YES to active this function
Automatic Program
Selection
P-- P_ _1-10 Trigger the built-in programs
Speed automatic
program
S-- S001-S100 Adjust the speed of the automatic program
Sound-active SoUd rUn Adjust the red, green & blue levels to create a custom color
3.3 MENU STRUCTURE