ProLights 4MOON, Руководство пользователя

Страница: 28 / 36

4MOON - 4MOONCL
10
3.8 DMX MODE
This mode allow the unit to be controlled by any universal DMX controller.
• Press the button MENU until [ 512 ] is displayed
• Press the button ENTER to confirm.
• Then, use the button UP/DOWN to select the desired DMX address ( d001 - 512 ). Press and hold to scroll
quickly.
• Press the button ENTER to store.
The tables on page 12 indicate the operating mode and DMX value. The 4MOON/4MOONCL is equipped
with 3-pole XLR connections.
3.9 DMX ADDRESSING
To able to operate the 4MOON/4MOONCL with a light controller, adjust the DMX start address for the first
a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the 4MOON/4MOONCL. The other functions of the light effect
panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
6 33 33-38 39 45 51
3.10 CONNECTION OF THE DMX LINE
DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-
ance and low capacity.
The following diagram shows the connection mode:
ATTENTION
The screened parts of the cable (sleeve) must never be connected to the system’s earth, as this would
cause faulty fixture and controller operation.
Over long runs can be necessary to insert a DMX level matching amplifier.
For those connections the use of balanced microphone cable is not recommended because it cannot
transmit control DMX data reliably.
DMX - OUTPUT
XLR socket
DMX - INPUT
XLR plug
Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Fig.5