www.prolight.co.uk
Tour Batten TW
User Manual
7
Chase mode:
To access the chase mode, press the
“MENU”
button on the front of the unit to show
“Program”
on the LCD display. Now the
“UP”
and
“DOWN”
buttons to set the required program
“01” -
“10”/ “Auto”/ “Full”
. Press the
“ENTER”
button to confirm the setting.
“Master”
should now be shown on the LCD display. Use the
“UP”
and
“DOWN”
buttons to set the chase
modes dimming
“000” - “100”
. Press the
“ENTER”
button to confirm the setting.
(000 = LED off, 100 = LED at full brightness).
“Speed”
should now be shown on the LCD display. Use the
“UP”
and
“DOWN”
buttons to set the required
speed
“01” - “100”
. Press the
“ENTER”
button to confirm the setting.
(01 = slow, 100 = fast).
“FadeTime”
should now be shown on the LCD display. Use the
“UP”
and
“DOWN”
buttons to set the
required amount of fade
“000” - “100”
. Press the
“ENTER”
button to confirm the setting.
(000 = no fade, 100 = full fade).
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions
