Prolight ELUM040, Руководство пользователя

Страница: 13 / 25

12
Lamp On time
To select Lamp On time , press the ENTER button to show LAMP ON TIME on the display. Press the
ENTER button to confirm, then use the UP/DOWN buttons to select Exit or Reset Time , press the
ENTER button to store. To go back to the functions without any changes press the MENU button
again. Hold and press the MENU button for one second or wait for one minute to exit the menu
mode.
Firmware Version
To select Firmware Version , press the ENTER button to show FIRMWARE VERSION on the
display. Press the ENTER button and the fixture software version will show on the display. Hold
and press the MENU button to exit.
Reset Functions
Enter MENU mode, select Reset Function , press the ENTER button to confirm, use the UP/DOWN
buttons to select Pan/Tilt, Zoom or All.
Pan/Tilt
To Select Pan/Tilt , press the ENTER button to show the PAN/TILT on the display. Use the
UP/DOWN buttons to select Yes (the unit will run a built-in program to reset pan and tilt to their
home positions) or No , press the ENTER button to store. Hold and press the MENU button to exit
menu mode.
Zoom
To select Zoom , press the ENTER button to show ZOOM on the display. Use the UP/DOWN
buttons to select Yes (the unit will run a built-in program to reset the zoom to its home position)
or No , press the ENTER button to store. Hold and press the MENU button to exit menu mode.
All
To select All, press the ENTER button to show ALL on the display. Use the UP/DOWN buttons
to select Yes (the unit will run a built-in program to reset all motors to their home positions) or No ,
press ENTER button to store. Hold and press MENU button to exit menu mode.