Prolight EclDisplay DATFC, Руководство пользователя

Страница: 15 / 40

PROLIGHTS - EclDisplay
UNFC /
EclDisplay
DATFC 13
2
3
4
5
1
7 6
2 3
8
9
7
6
2 3
8
9
7 - START UP
CONNECT AND DISCONNECT POWER FROM THE PRODUCT
To apply and disconnect power to the product:
• Check that the product is installed and secured as indicated in the Safety Informations, and that
personal safety will not be put at risk when the fixture lights up.
• Connect the power connector into the Mains input socket (100-240 VAC-50/60 Hz).
• The product is then ready for its operations and can be controlled through the available input sig -
nals on board.
• To disconnect power from the product, disconnect the Mains from the socket.
8 - PRODUCT OVERVIEW
1. SAFETY EYE to attach safety cable;
2. KNOB for releasing and locking the optic;
3. KNOB for releasing and locking the optic and for zoom;
4. OPTIC (accessory not included, in the figure ECLDISPWASHL1530);
5. RUBBER RING (accessory included in the box optic);
6. PLASTIC CAP for access to connections;
7. KNOB dimming;
8. LOCK TILT;
9. PLASTIC ARM COVER.
Fig. 07