4A
press the
ENTER
button to setup or it will automatically return to the main functions without
any change after idling 8 seconds. To go back to the functions without any change press the
MENU
button. The main functions are showing below:
DMX 512 Address Setting
Press the MENU button up to when the
is showing on the display. Press ENTER
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once the address has been selected, press the
ENTER
button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the
MENU
button again.
Auto Setting
Press the
MENU
button up to when the
is blinking on the display. Pressing
ENTER
5A
button and the DMX address of the fixture can be set automatically by built-in program. To go
back to the functions press the
MENU
button again.
Channel mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(channel 1)
or
(channel 2) or
(channel 3) mode. Once the mode has been selected,
press the
ENTER
button to setup or automatically return to the main functions without any
change after 8 seconds. To go back to the functions without any change press the
MENU
button again.
Slave Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(normal) or
(16 light show) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the
MENU
button
again.
Show Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(stand
alone) or
(show 1) or
(show 5) or
(macro) or
(fade)
mode. Once the mode has been selected, press the
ENTER
button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the
MENU
button again.
Blackout Mode
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to select the
(yes blackout) or
(no blackout) mode. Once the mode has been selected, press the
ENTER
button to setup or automatically return to the main functions without any change
after 8 seconds. To go back to the functions without any change press the
MENU
button
again.
