2D
1. Safety Introductions
WARNING
●
Please keep this User Manual for future consultation. If you sell the fixture to another
user, be sure that they also receive this instruction booklet.
●
Unpack and check carefully there is no transportation damage before using the fixture.
●
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the fixture.
●
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
●
Disconnect main power before servicing and maintenance.
●
Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only,
but always by taking its base.
●
Maximum ambient temperature is Ta : 40
℃
. Don’t operate it where the temperature is
higher than this.
●
In the event of serious operating problem, stop using the fixture immediately. Never try
to repair the fixture by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center. Always use the same type spare parts.
●
Do not connect the device to any dimmer pack.
●
Do not touch any wire during operation and there might be a hazard of electric shock.
●
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain
or moisture.
●
The housing must be replaced if they are visibly damaged.
●
Do not look directly at the LED light beam while the fixture is on.
●
There are no user serviceable parts inside the fixture. Do not open the housing or
attempt any repairs by yourself. In the unlikely event your fixture may require service,
please contact your nearest dealer.
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.
3D
2. Technical Specifications
¥
Power supply
Input Voltage
：
AC 120V~60Hz or AC 230/240/250V~50Hz
Power consumption
：
21W (Color Par 56)
28W (Color Par 64)
¥
LED
Color Par 56
：
total 156pcs, Red 50pcs, Green 53pcs, Blue 53pcs
Color Par 64
：
total 212pcs, Red 70pcs, Green 71pcs, Blue 71pcs
¥
Channels
Channel 1 = Red
Channel 2 = Green
Channel 3 = Blue
Channel 4 = Dimmer / Sound Chase / Strobe
¥
Dimension
：
Ø190mm x 185mm
(
Color Par 56)
Ø 216mm x 205mm
(Color Par 64)
Luminous intensity:
