DMX SWITCH PACK
CA-2405
INSTALLATION
TROUBLESHOOTING
CAUTION
POWER CONNECTIONS
2B
The switch pack is equipped with 24 DMX channels, it can be controlled by universal DMX controller, and
each channel can be used for the ON/OFF control for different equipment, such as lighting effects. It will be
"ON" when the DMX value is above 130, and "OFF" when the DMX value under 120. If you use a universal
DMX controller to control the switch pack, you have to set DMX address so that the unit can receive DMX signal.
- Start the address
.
Select the channels of DMX controller.
.
Dip switches:
.
Examples:
Channel 1: dip /on: #1 (1=1)
Channel 25: dip /on: #1, #4, #5 (1+8+16=25)
Channel 49: dip /on: #1, #5, #6 (1+16+32=49)
Channel 73: dip /on: #1, #4, #7 (1+8+64=73)
Dip
#1
#2
#3
#4
#5
#6
#7
#8
#9
Value
1
2
4
8
16
32
64
128
256
73
49
25
1
Channel
4
3
1
2
Unit
ON
ON
ON
ON
Dip Switch Setting
3
3
2
1
1 2
5
4
7
6
8 9
5
4
6
8
7
9
3
3
1 2
1 2
5
4
6
5
4
6
8
7
9
8
7
9
- If the switch pack is not works, check if the main power switch is "ON". And the correct DMX connections.
- If the switch pack is functional but equipment ( light fixture ) does not light on - check if lamp works properly
or check if the DMX address is correct.
- If after trying these solutions, you still have a problem, please contact your dealer for technical assistance.
- Do not splash water or other liquids into or onto your unit.
- Always disconnect the main power before any serving or repair.
- Never open the unit while in use.
- No user serviceable parts inside please refer to the nearest authorized technical assistance office
for service.
The unit is supplied with a power plug appropriate to its voltage and destination. Should any other
connections be required they must be carried out with the following configuration.
Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable
Always unplug the CA-2405 from mains power before
servicing the fixtures that are connected to CA-2405!
#10
ALL ON
DMX SWITCH PACK
CA-2405
MAIN FUNCTIONS
1. 24 Channels switch pack with DMX input/output.
2. Current rating: 12A.
4. Output: 24 power output sockets.
3. DMX input/output with dip switches to set the DMX address.
SPECIFICATIONS
1. Power input: AC 120V 60Hz, 230V~250V 50Hz.
2. Load: 0.5A per channel ( Max ) , Total 12A ( Max ).
3. Weight: 3.5 kg
4. Dimension: 482.5 x 121.5 x 89 mm
GENERAL FUNCTIONS ( FRONT )
1. Power Switch: Used to turn the unit ON / OFF.
2. DMX LEDs: DMX signal input present
3. Dip Switches: Assign DMX address to the unit.
4. Power Output LEDs: Power output present.
GENERAL FUNCTIONS ( REAR )
1B
1. Power Output : 24 power output sockets.
482.5
8
9
1
2
1
.5
1
3
4
2
1
3
4
2
4. Power Cord : Supply main power for the fixture.
2. DMX Input: It is used to receive incoming
DMX signal, such as DMX controller .
3. DMX Output: It is used to transmit the incoming DMX signal to another DMX fixture.
5.
:
Power Consumption
3.2W (no power output)
120W (Max. P
er load)
ower consumption p
2880W (Max. P
)
ower consumption
