Ember Bed Brightness Mode
•
The Ember Bed Brightness Mode sets the ember bed
brightness
•
Use the UP arrow button or DOWN arrow button to
scroll through the log brightness settings: L0 (dimmest),
L1, L2, L3, L4, L5 (brightest)
Flame Brightness Mode
•
Use UP arrow button or DOWN arrow button to scroll
,
e
m
a
lf
o
N
(
0
F
:
s
g
n
it
t
e
s
s
s
e
n
t
h
g
ir
b
e
m
a
lf
e
h
t
h
g
u
o
r
h
t
F1, F2, F3, F4, F5 (brightest).
Flame Color Mode
color.
•
Use UP arrow button or DOWN arrow button to scroll
•
Use UP arrow button to increase the setting of the
selected function.
•
Use DOWN arrow button to decrease the setting of the
selected function.
Activate Child Lock
When the unit is ON, hold the POWER button for 10
seconds to activate the Child Lock function. E3 will be
displayed and a "Beep" will sound 3 times to indicate the
Child Lock function is activated. Then, all function keys are
locked. When pressing any button, E3 will be displayed to
indicate the Child Lock function has been activated.
Deactivate Child Lock
To deactivate the Child Lock function, hold the POWER
button for 10 seconds. Then, all functions keys are unlocked.
• Press the POWER button to turn ON or OFF the unit.
The heater must be properly installed before it is used.
•
When the unit is in ON mode, the power icon indicator
light will be shown green.
•
When the unit is in OFF mode, the power icon indicator
light will be shown red. When power OFF, unit will be
stopped, if heater is working before power OFF the
unit, fan will have 20 seconds delay to ensure heat will
not be trapped inside the unit.
•
Press the MODE button to cycle through the different
functions. Each time the MODE button is pressed, the
,
r
e
m
i
T
,
e
r
u
t
a
r
e
p
m
e
T
-
n
o
it
c
n
u
f
t
x
e
n
e
h
t
r
e
t
n
e
l
li
w
e
d
o
m
Ember Bed Brightness, Flame Brightness or Flame
Color.
Temperature Mode
•
The Temperature Mode controls the heater’s thermostat
setting.
•
Press UP arrow button or DOWN arrow button to scroll
through the pre-set temperature range from 59°F (15°C)
to 86°F (30°C), ON and OF (OFF).
•
Hold the mode button for 3 seconds, this allows the
temperature unit to change from °C to °F or °F to °C.
The unit default is °F.
•
When the ambient temperature is higher than the set
temperature, heater will turn off automatically.
Timer Mode
•
The Timer Mode sets the fireplace to automatically
shutoff.
•
Press UP arrow button or DOWN arrow button to adjust
the timer setting from 0 hour (OFF) to 9 hours with 0.5
hour intervals.
Operating Instructions
7
Power Button
heater will turn on for internal check program.
The unit has a memory function with last settings for
power to the unit has been interrupted.
Mode Button
Up Arrow Button
Down Arrow Button
Child Lock
This function is only available if using the control panel.
Setting
Color
C1
C2
Orange
Blue
Setting
Color
C3
C4
Blue
Color Rotation
Child Lock function is only available if using the control
panel.
