Prokonian 064-4005-4, Руководство пользователя

Страница: 30 / 44

5
OPERATING INSTRUCTIONS
CARE AND MAINTENACE
• Make sure the unit is turned OFF, unplugged and the heating elements of heater are cool whenever you are
cleaning the heater.
• Clean the metal trim using a water-dampened soft, clean cloth. DO NOT use brass polish or household cleaners
as these products will damage the metal trim.
• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and
require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater and air intake/output
vents is recommended.
• Any other servicing should be performed by an authorized service representative.
WARNING:
Make sure the power is turned off before proceeding. Any electrical repairs or rewiring of
this unit should be carried out by a licensed electrician in accordance with national and local codes.
If repairing or replacing and electrical component or wiring, the original wire routing, color coding and
securing locations must be followed.
WARNING: Electrical outlet wiring must comply with local building codes and other applicable
regulations to reduce the risk of fire, electrical shock and injury to persons .
WARNING: Do not use this fireplace if any part of it has been under water. Immediately call a qualified
service technician to inspect te fireplace and replace any part of the electrical system.
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire,
electrical shock or personal injury.
WARNING: During any service of this appliance, the power to the unit must be turned off. First turn the
main power switch to the “OFF” position. Then remove the electrical plug from the wall outlet.
Child Lock
Activate Child Lock
When the unit is ON, holding the POWER button for 10 seconds to activate the Child Lock function. E3 will be
displayed and "Beep Sound" for 3 times that indicate the Child Lock function activate. All function keys are
locked. When pressing any button, E3 will be displayed that indicate the Child Lock function activate.
Inactivate Child Lock
To inactivate the Child Lock function, holding the POWER button for 10 seconds.
Note: Child lock function is only available if using the control panel.
UP Arrow Button
• Use up arrow button to increase the setting of the selected function.
Down Arrow Button
• Use down arrow button to decrease the setting of the selected function.