INTELLI-RV
500AMP SHUNT MODULE
P/No. PMSHUNT
INSTALLATION GUIDE
Please read this document very carefully to avoid battery monitor
malfunction or fire hazards.
The active shunt must be located in a dry environment.
MOUNTING THE MODULE
Do not use mounting screws with countersunk heads.
WARNING
WARNING:
l
The shunt must always be installed into the negative line.
l
The battery negative terminal may only contain one cable, which is the one going
to the shunt. If there are other cables connected to this terminal as well, this may
produce incorrect display readings.
l
Always connect the battery negative terminal to the ‘B-’ stud of the shunt.
Connecting this terminal to the ‘S-’ stud will produce incorrect display readings.
Always disconnect the battery negative cable first before installation.
Always connect the battery negative cable last when the installation has been
completed.
More information https://www.caravansplus.com.au
