FAULTS & ERRORS
There are three error codes that may be displayed. These will be displayed in the
following way:
LCD
Power On LED
Fault
Remedy
Err
Slow Flashing
Short circuit or reverse
connection of the clips
Check clips are not
touching each other
OR
Check the clips are
correctly connected
to the battery
F01
Fast Flashing
Bulk charging has
timed out and stopped
after 22 hours
Battery may be faulty
–
Slow Flashing
The charger has
entered recondition
mode 3 times and
has timed out
Battery may be faulty
and may need replacing
OR
There is a load on the
battery causing the
battery to fail Analysis
OTP
Fast Flashing
The charger has
overheated and has
switched off
Ensure adequate
ventilation around
the charger
OLC
Fast Flashing
Sensor wires are not
connected to the
positive/negative
connections
If DC leads have been
cut for hardwiring, check
sensor wires are included
in both positive & negative
connections (Refer
to page 13, point 1)
OCP
Fast Flashing
The charger has
encountered an error
Contact Brown & Watson
International
18
