Projecta IC1500L Скачать руководство пользователя страница 3

3

FEATURES

5 STAGE AUTOMATIC CHARGING

This is a fully automatic battery charger with 5 charge stages.
Automatic charging protects your battery from being overcharged so you can leave the 
charger connected to the battery indefinitely. 
5 stage charging is a very comprehensive and accurate charging technique that gives 
your battery longer life and better performance compared to using traditional chargers.
The 5 charge stages are:
Soft Start 1, Soft Start 2, Bulk, Absorption and Float.

VOLTAGE

CURRENT

(AMPS)

STAGE

1

2

4

5

3

SOFT START 1

Increases battery 

life by gently 

starting to charge 

the battery 

5% of bulk

SOFT START 2

Increases battery 

life by gently 

starting to charge 

the battery 25% 

of bulk

BULK CHARGE

Reduces charging 

time by delivering 

maximum charge 

to set voltage

ABSORPTION

Ensures a full 

charge to the 

battery without 

overcharging

FLOAT

Float charge 

maintains the 

battery at 100% 

charge

Soft Start 1

This is a preliminary charge that is for heavily discharged batteries where the voltage is 
between 2-8 Volts. Charge is limited to 5% of set current.

Soft Start 2

This is a preliminary charge that is for discharged batteries where the voltage is between 
8-10 Volts. Charge is limited to 25% of set current.

Bulk (Constant Current)

The Bulk stage reduces charging time by charging the battery at the maximum rate 
(constant current) to a set voltage, at which point the battery is approximately  
80% charged.

Absorption (Constant Voltage)

The absorption stage charges the battery to 100% by adjusting the charge rate allowing 
the battery to absorb more power. 

Float

The Float stage maintains the battery at 100% charge without overcharging or 
damaging the battery. This means the charger can be left connected to the battery 
indefinitely.

Содержание IC1500L

















Отзывы: