CAUTION – BATTERIES PRODUCE EXPLOSIVE GASES, TO REDUCE THE RISK
OF EXPLOSION OR INJURY ALWAYS ENSURE:
• No sparks or flames are present
• Eye protection is worn
• All vehicle or battery manufacturer’s instructions are followed
• The load is “OFF” before connection or disconnection
• Correct polarity, do not reverse connect
• Beware of moving engine parts
NOTE
Carbon pile load testers produce a great amount of heat while the load is ‘ON’, do not apply the load for
more than 20 seconds at a time and allow time to cool between tests.
When operating the unit for the first time it is normal for a small amount of smoke to develop as the
lubricants used in the manufacturing process burn off.
SPECIFICATIONS
P/No.
BTL300
Tests:
Volts (0–24VDC)
6/12/24V Lead Acid Batteries
Battery Range:
Up to 2000CCA (320Ah)
Test Load:
Adjustable Carbon Pile
0–1000 AMPS
Maximum Load ‘ON’ Time: 20 seconds
Recommended Cool
Down Time:
2 minutes
Test time alert:
Buzzer sounds after 15 sec
Cable length:
1400mm
Size:
350mm x 355mm x 175mm
Weight:
8.4kg
