GENERAL RECOMMENDATIONS
Thank you for purchasing this building. We hope you will be delighted with your new building for many years to come.
These instructions have been written as a guide to assembling this building and will provide you with an overview of
the process of constructing this building. There are a number of considerations to be thought of before constructing
the building and how to maintain your building upon completion. This section is also aimed at ensuring you are aware
of considerations such as: location for construction, treatment of the building and construction information.
GLAZING:
The glazing is generally bound with a holding band and may look like one thick piece when delivered. It
may even be in between two of the panels as might the fixing kit.
REMOVE PROTECTIVE FILM FROM ALL GLAZING
BEFORE USE
. The glazing is safer to use than glass and is an economic solution for garden building use, but must be
installed correctly, carefully and safely. Glazing that is fitted to the outside of buildings is an uncomplicated method
that does not require beading. The glazing on all the garden buildings does not make the windows water tight and
we suggest using a silicon sealant to improve water resistance around the edges of the glazing.
DOORS:
Generally the doors are sent loose for all buildings. Some buildings such as summerhouses may have the
doors already fixed to the door frame. If your building is not built on a flat, level surface you may experience difficulties
when fitting your doors. You may find a gap between the doors or around the edges.
This is not a fault as the doors will move, shrink and expand during different weather conditions. Occasionally during
transit the door frame can become misaligned. This is easily solved by hanging the door on a level surface
BEFORE
the
panels are attached.
SUMMERHOUSES
: Some summerhouse doors are held together at the base of the frame with a
screw or nail for transportation purposes. Remove this screw or nail before commencing construction.
PANELS:
The panels that of your building may move during transit resulting in them becoming un-square. Simply tap
the panel
at it’s corners and make sure that the measurements from top to bottom diagonally across the panel is equal.
This should make the panel square
BUILDING LOCATION & CONSTRUCTION:
Locate your building in a suitable and well prepared area, which is flat and
protects the building as much as possible from extreme weather conditions such as high wind, snowfall, flooding etc.
It is very important that a solid and level foundation is prepared to ensure the building will be level and square.
This will
help ensure that all parts fit correctly. The building is not fully structurally sound until construction is complete. You
may experience moments, such as when building the wall panels, where you feel the building is not safe and may be
flexing too much. This is perfectly natural so do not worry and take your time as full rigidity for the building will only
occur on completion of the construction process.
We recommend that you construct your building within 1 month of
delivery as the timber may begin to warp.
TREATMENT:
Treating the product after assembly is essential to ensure the building will not deteriorate. We
recommend you apply the finishing product to a small area to ensure it provides the intended result before proceeding.
IMPORTANT NOTICE:
The natural moisture content of wood will change according to season. We recommend
applying a quality timber treatment to minimise the effects. Re-apply treatment annually to prolong the building’s life.
WOOD CHARACTERISTICS:
Wood is a natural material, which means that no two boards on your building will be
identical and will expand and contract due to moisture levels. This natural affect of expansion and contraction is
inevitable and is compensated for by the tongue and groove construction in tongue and groove buildings. The timber
in overlap buildings may warp and twist over time, which is a natural process. The timber may crack naturally over
time, but will not affect the structural integrity of the building provided it has been assembled as advised. Keep panels
away from trees, fences and other high moisture containing elements to reduce and help prevent warping. If boards
warp and twist it is possible to purchase replacement boards to do so call our Product Support on 01777 802300.
Keep your building ventilated to avoid mould.
This building is water resistant, but not water tight. Please wait for weather to change before notifying us if you notice changes in the structure
.
TOOLS REQUIRED:
- Drill with 4.5, 3 and 2mm drill bit / Hammer / Spirit Level / Measuring Tape / Screwdriver (Phillips) /
Stanley Knife / Wood Saw / Step Ladder.
PLEASE NOTE: You are advised to pilot drill all screw holes and ensure all screwheads are countersunk.
CUSTOMER SERVICE:
If there are any queries regarding the building construction or aftercare please contact the
supplier of the building who will do their upmost to ensure customer satisfaction.
ADDITIONAL SAFETY RULES AND GUIDELINES:
- No one should use the equipment until properly assembled.
- Read the instructions thoroughly a couple of times before attempting each section of the build.
- Make sure you have adequate space, a safe working environment and a flat level base to work on.
- Take your time, do not panic.
- Construct your building within one month of delivery to stop parts warping / bowing.
ADDRESS:
Project Timber Ltd, Parry Business Park, Grassthorpe Road, Sutton-on-Trent, Newark, Notts, NG23 6QX
CARE TEAM:
01777 802300
IMPORTANT SAFETY NOTICES
ALWAYS BE ON THE SAFE SIDE – IMPORTANT SAFETY TIPS
-
This building should be constructed by at least two adults.
- Do not use this product if it has been modified or damaged.
- Allow adequate time to complete construction. If you hit any snags, take a break, keep calm, and seek additional
help if necessary.
- Make sure that there is adequate space around the construction site to enable access to all sides of the building
during construction.
- Do not attempt to construct the building in strong winds or poor weather conditions.
- Make sure that any ladders used during construction are in a good condition and that all tools are in good
working order.
- The building is not completely stable until construction is complete and the roof of this building is not intended to
support significant weight. Do not climb on the roof.
- Keep bags, nails and fixings out of the reach of children.
Due to the nature of wooden panel products please watch out for the following minor blemishes:
- Protruding nails = hammer in the nails so that they are flush with the wood’s surface.
- Splintered wood = smooth down with sandpaper.
- Loose or dead knots = use a non-toxic wood glue to secure.
- Wear protective gloves and robust clothes during construction.
- Make sure that any paint or preservative that you use is non-toxic and complies with EN71 regulations.
- Perform periodical checks throughout the life of the building to ensure that the original condition is maintained.
- Construct your building within a month of delivery to reduce the chances of the panels / boards warping.
PRODUCT WARRANTY
- If there is any cause for concern or any other problems are found on or after delivery, such as damaged parts
DO NOT
BUILD
, please visit our Care Team -
01777 802300
for further advice and resolution and
stop all use before assembly until issues are resolved.
-
IMPORTANT:
Throughout the life of the building please conduct checks to ensure the original condition is maintained.
MAINTENANCE
- Products are built to the highest quality standards and should provide convenient, secure storage for years to come,
this of course being subject to reasonable use, care and transportation.
AFTER MARKET MODIFICATION
- We do not recommend modifying this product. However, customers do enjoy modifying their buildings with their own
specific needs in mind as our products allow for a wide range of uses.
- If you modify this product for your own personal requirements you are doing so at your own risk.
- Customers who modify their buildings should make sure to do so safely and so that they do not affect the integrity of
the structure.
- If you are thinking of modifying this building be aware that any modifications invalidate your warranty and may affect
your consumer rights.
- If in doubt about the product’s limitations please read and understand all of the instructions and guidance notes. If
necessary please contact the retailer that the item was purchased from.
- Please contact the retailer from which the product was purchased for warranty and guarantee information.
- PLEASE NOTE: The warranty does not extend to damage caused by post-purchase transportation, careless handling or
damage caused by misuse or modification.
- Treat your building annually with a quality timber treatment to comply with the buildings warranty.
GARDEN BUILDINGS:
THESE PRODUCTS ARE INTENDED FOR DOMESTIC AND OUTDOOR USE ONLY.
These products have been designed as an affordable solution to most popular light domestic uses.
- If you ever need to purchase spare parts for your building you can do so by contacting customer services by calling our
Care team -
01777 802300
where our friendly team will help you buy what you need.
SPARE PARTS
