ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
5
6
x 2
x 2
x 2
x 3
Machine screw
Outlet box screw
Wire nut
B
B
B
B
DD
AA
BB
CC
CC
A
B
C
ASSEMBLY INSTRUCTIONS
5. Attach wire nuts (CC). Tape wire nuts (CC)
and wires together.
B
C
BB
AA
A
4
5
DD
3
4
1. Remove the socket covers (C) from the sockets on
mounting bracket (A). Then separate the mounting
bracket (A) from the front plate (B). The mounting
bracket (A) is supplied with keyhole slots for
additional attachment to the mounting face. Hold
the mounting bracket (A) against the wall with the
outlet box (not included) and mark the position of the
keyhole slots on the mounting surface; make sure
the fixture will be level and mounted to a secure
surface.
2. Drill the holes at the marks on the mounting
surface, then insert the plastic wall anchors (DD)
into the holes.
Plastic wall anchor
3. Attach the mounting bracket (A) to the outlet box
using the two outlet box screws (BB). Attach the
mounting bracket (A) to the mounting surface using
machine screws (AA). Note: Make sure the narrow
ends of the keyhole slots face up.
4. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire.
Helpful hint:
If necessary, attach copper
ground wire to grounded outlet box.
6. Attach front plate (B) to mounting plate (A) by
aligning holes on front plate (B) with sockets on
mounting plate (A). Push socket covers (C) onto
sockets.
Lowes.com
Lowes.com
