8
ROUGH-IN
1/2-14NPSM
8''
9-15/16''
1-3/4'
'
15-1/2'
'
8-5/8''
7-1/2'
'
10.00°
10''
2-1/2''
TROUBLESHOOTING (Continued)
PROBLEM
POSSIBLE CAUSE SOLUTION
Faucet leaks
around aerator.
The aerator is incorrectly
fitted, dirty, or small parts
inside the aerator are
improperly installed.
1. Remove the aerator from the spray head on the faucet body. Inspect
the black rubber gasket inside the aerator. The rubber gasket should
be flat.
2. Reinstall the aerator on the spray head.
Faucet has an
improper water
pattern.
The aerator is dirty or
small parts inside the
aerator are improperly
installed.
1. Remove the aerator from the spray head by turning it clockwise.
2. Gently flush the small parts inside the aerator to clear away any
debris.
3. Screw the aerator back onto the spray head and tighten.
No water pressure
or low water
pressure after a
longer period of
use.
The connector is blocked. 1. Remove the spray head by unscrewing it from the hose assembly.
2. Hold the end of the hose assembly down into the sink and turn the
faucet on to the warm position where it mixes the hot and cold water. If
the water flow is still slow or completely blocked, please call customer
service.
