POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
Unpack
(1) Soothing Projector
(1) Power adapter
Getting Started
1. PLUG IN
The Project Nursery Soothing Projector offers 2 options for
power:
• power adapter
• 3 AAA batteries (not included)
Everyday use
USING BLUETOOTH
To turn the projector on and off:
Press and hold the
on
the front of the projector.
To play music from your phone on the projector:
Make sure
the projector is on and its BT indicator is solid blue (if it isn’t,
give a quick press to the
button). Then start playing music
on your phone.
To play/pause music:
Press the
button on the projector
or use the playback controls on your phone.
To control volume:
Use the – and + buttons on the projector
or the volume controls on your phone.
To turn built-in sounds on:
Make
sure the projector is on (press and
hold
if it’s not), then press the
SOUNDS ON
button.
To cycle through these sounds:
Press the
SOUNDS ON
button
again. Each press goes to a
different selection.
To adjust the volume:
Press the
–
or
+
button.
Soothing Projector,
back
Soothing Projector,
bottom
Remove the battery door and insert
3 AAA batteries (not included) into
the battery compartment. (Match
the polarity signs on the inside of the
compartment!)
Place the battery door back on the
bottom of the Soothing Projector.
Screw the battery door latch back
into place to lock the door.
To use the power adapter:
Plug
the power adapter into the
DC
IN 6V
jack on the back of the
Soothing Projector. Plug the
other end of the power adapter
into a working outlet or surge
protector.
Battery door
Door latch screw
IMPORTANT:
NEVER place the Soothing Projector or cords
of any kind inside the crib. NEVER place the Soothing
Projector or cords within reach of children. THIS IS NOT A
TOY.
Soothing Projector,
front
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
To switch to Bluetooth:
Press the
button
To turn off all sounds:
Press and hold the
button to turn
the soother/projector off.
Note:
If you hear a vibrating noise when you’re playing sounds, it might be the
battery compartment door on the bottom of the projector. Check to make sure
the battery door is completely closed and its latch is securely screwed in.
3. PAIR WITH YOUR PHONE
Make sure your phone’s Bluetooth is
turned on. Then open its Bluetooth
menu and choose “
Project Nursery
PNP80
” from the list of available
devices.
After a few seconds, the speaker
announces “Device connected” and the
BT
indicator turns solid blue.
Notes:
When you turn it on, the PNP80 tries to reconnect
with the last device it was connected to. If you’d like
to pair to a new device instead, give a quick double-
press to the
. The speaker announces “Pairing,” and
the BT indicator starts blinking rapidly. The PNP80 is ready to pair to your new
device!
The process of enabling Bluetooth and connecting varies from device to device.
See your device’s owners manual for more information and specific instructions.
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
2. TURN ON
Press and hold the
button on the front
of the projector to turn it on. The speaker
plays the power on sound.
After a few seconds,
BT
indicator
starts flashing rapidly and the speaker
announces “Pairing.”
To use batteries:
Use a flathead screwdriver (not included)
to unlatch the battery door on the bottom of the Soothing
Projector.
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
POWER/PAIR
BT
LIGHT
PROJECTOR
TIMER
SOUNDS ON
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If
you’re having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
PLAYING THE BUILT-IN SOUNDS
The Project Nursery Soothing Projector offers a variety of
built-in soothing lullabies and nature sounds, as well as white
noise, to calm baby.
