3.6 GPI submenu
The
“GPI” submenu includes:
⑴
GPI control: on/off
On: User can control the monitor through GPI control unit
Off: User cannot control the monitor through GPI control unit
⑵
Terminal1~5: Define each GPI terminal function; see details
in
“4.REMOTE interface definition”
3.7 PIP submenu
The
“PIP” submenu includes:
⑴
Sub window size: Off, Large, Small
⑵
Sub window position: Right-Bottom, Right-Top, Left-Bottom,
Left-Top
⑶
Sub window source
When the input signal is SDI1/SDI2/HDMI, the PIP window
signal can only be CVBS;
When the input signal is CVBS, the PIP window signal can be
selected from SDI1/SDI2/HDMI.
4. REMOTE Interface Definition
The GPI interface is the DB9 port, the DB9 terminals definition are as below:
User can define each GPI terminal function in the
“menu”. It will be on when GPI terminal
connected to GND, and off when disconnected.
Terminal 1
～
5: The functions can be set as below:
Undefined
Freeze Frame
Tally-R
Button lock
Tally-G
PIP
Tally-Y
Focus assist
SD Aspect Ratio
Audio bar
Scan
Zebra
Zoom
B/R/G Only
Mono
Timecode
DB9
1
2
3
4
5
6
7
8
9
GPI
GPI_1
GPI_2
GPI_3
GPI_4
GPI_5
VCC_OUT
485B(Rx-)
485A(Rx+) GND