ProHD DT-N24H, Инструкция по эксплуатации, Страница: 8 / 23

8
Index of Parts and Functionos (cont.)
Front panel
Speaker:
For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is plugged in)
INPUT SELECT buttons/lamps
Selects an input.
SDI 1: E. AUDIO 3G/HD/SD SDI (IN 1) terminal
SDI 2: E. AUDIO 3G/HD/SD SDI (IN 2) terminal
HDMI:HDMI terminal
ANALOG: select from CVBS, VGA, Y/ Pb / Pr signal
●
The lamp for the selected input lights
FUNCTION button
You can use the functions assigned to this button.
DISP button
VOLUME MENU/PUSH
When the menu is inactivated, press “VOLUME MENU/PUSH” to turn on the main menu
Revolve “VOLUME MENU/PUSH” to adjust settings or parameters, and press to apply
When the menu is inactivated, revolve “VOLUME MENU/PUSH” to adjust the sound volume
Picture adjustment knob
BRIGHT
：
Adjusts the picture brightness and the default value is 50.
CONTRAST ： Adjusts the picture contrast and the default value is 50.
SATURATION
：
Adjusts the picture saturation and the default value is 50.
POWER
PHONE
3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring.
1
2
3
4
5
6
7
8
SDI1
SDI2 HDMI ANALOG F1 F2 F3
F4 F5 DISP
1 2 3
4
5 7
6 8
1
MENU/ENTER BRIGHT CONTRAST SATURATION
POWER
PHONE
Tally lamp
This lamp is controlled by the tally function of the
Make contact terminal. ( External Control on Page 17.)
• You can select the color of the tally lamp from "Green",
"Red", or "Yellow".
* Directly press BRIGHT/CONTRAST/SATURATION knobs, the parameters will recover to default value.