ProHD BR-DE900 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 53

ProHD BR-DE900 Скачать руководство пользователя страница 45

User Manual, Version 1.0

44

C H A P T E R 5

In This Chapter

Upgrading the Firmware

................................................................................ 44

Upgrading the Firmware

Important Notes Prior to Upgrade

JVC periodically releases new firmware versions that include critical updates as well as feature
enhancements.

ProHD BR-DE900 firmware and software upgrade process involves uploading a .TAR file within the
unit HTTPS user interface, allowing the unit to extract the required files and perform internal
updates. Uploading time of the upgrade file can take up to few minutes and may vary from one
computer to another. It also depends on network speed and the connection's quality between the
computer and the ProHD BR-DE900 appliance. On regular LAN, it takes only few seconds.

During the upgrade, while the file is uploaded, the web based HTTPS interface polls the unit
status. This polling attempt occurs also during the actual execution of the upgrade inside the
appliance. To avoid interruption to the upgrade process, do not close the active browser window
used for uploading the file.

Read carefully the step-by-step procedure below and pay extra attention to notes and warnings.

To upgrade ProHD BR-DE900 Firmware version:

1.

Send JVC your upgrade firmware request.

2.

Click the

General

tab.

3.

Click

Firmware Upgrade.

The

Load Firmware

window appears.

4.

Click

Browse

. A browser window opens.

Firmware Upgrade

«
...
43
44
45
46
47
...
»

Содержание BR-DE900






















































Отзывы:

Нет отзывов