Operation Instructions
Step 1
Carefully unpack and clean grill plates with
mild soap then sponge clean with cold water.
WARNING
ALLOW 2” MINIMUM CLEARANCE
between
adjacent equipment and/or wall areas.
DO NOT
touch hot surfaces.
Step 3
Plug into proper 3 prong wall outlet. If other appliances
are connected to the same circuit make sure the total
load does not exceed maximum ampacity of the circuit.
Step 4: Warm-up
Energize by turning on the temperature control knob to your desired temperature. (0
o
-
425
o
F).
Allow at least 15-20 minutes to pre-heat grill.
When the pilot light is
lit
, the temperature has
NOT
been reached.
When the pilot light is
off
, the desired temperature has been reached.
Cleaning Procedure
Clean the grill with a cleaner and some type of scraper. Maintain on a daily basis to avoid product
build up on the grill surface.
Website:
www.doughpro.com
E-Mail:
PROPROCESS CORPORATION
P.O. Box 869 7328 Madison St. Paramount, CA 90723
(562) 531-0305
(800) 624-6717
Fax (562) 869-7715
FOR SERVICE CALL: (800) 624-6717
Step 2
Place in location where it will be used allowing
for clearances per the dimensions indicated.
3/8” OD (10mm)
protective guard
DIMENSIONS:
TW1520
A -
22 3/8” (568mm)
B -
20”
(508mm)
C -
17 3/8” (441mm)
D -
15”
(381mm)
TW2025
A -
27 3/8” (695mm)
B -
25”
(635mm)
C -
22 3/8” (568mm)
D -
20”
(508mm)
Includes 60” NEMA 5-15P approved cord and plug.
TW2025
230v/60hz
3214w/14 amps
TW1520
120v/60hz
1700w/14.17amps
Electrical Data
