Progressive Turf Equipment Slope-Pro Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 112

Progressive Turf Equipment Slope-Pro Скачать руководство пользователя страница 12

Slope-Pro

®

Operator’s Manual

8

Thrown Objects Hazard

Mowers can throw objects 300 feet or more under adverse
conditions.

To avoid serious injury or death to operator or bystanders from
thrown objects:

▪

Keep bystanders 300 feet away and keep everyone away from the
blade exhaust area from which objects can be thrown.

Inspect area for potential thrown objects before mowing:

▪

Remove

debris, rocks, wire, cable, metal objects and other foreign

materials from area. Wire, cable, rope, chains and metal objects
can be thrown or swing outside deck with great velocity:

▪

Mark

all objects that cannot be removed.

▪

Avoid

these objects when mowing.

High grass and weed area inspection

▪

Inspect

for and

remove

any hidden large debris.

▪

Mow

at an

intermediate

height.

▪

Inspect

and

remove

remaining debris.

▪

Mow

at final height.

Machine thrown object shielding:

▪

Keep all thrown object deflectors

in place and in good condition

when mowing.

▪

Do Not Operate

with any thrown object deflectors missing,

damaged or removed

Right of Way (Highway) Mowing

▪

No shielding is 100% effective in preventing thrown objects. To
reduce the possibility of injury:

▪

Maintain machine shielding and blades in good condition.

▪

Raise cutting height to 6 inches minimum.

▪

Inspect area

thoroughly before mowing to remove potential thrown

object hazards.

▪

Never allow blades to contact solid objects

like wire, rocks,

posts, curbs, guardrails or ground while mowing.

Various jurisdictions have specific requirements for work zone
safety. Know and adhere to your local requirements. Treat the
instructions in this manual as minimum requirements for safe
operation.

A careful and informed operator is the safest operator.

Safety Precautions

«
...
10
11
12
13
14
...
»

Содержание Slope-Pro

















































































































Отзывы:

Нет отзывов