Progressive Industries SSP-50, Инструкция по эксплуатации

Страница: 2 / 4

Smart Surge Instructions
1. Plug Smart Surge into AC power. DO NOT plug in your RV at this
time.
2. Verify that both Number 1 red indicator lights are lit to reflect power
source is wired correctly.
3. Verify Line 1 and Line 2 green surge indicator lights are lit.
4. If proper red and green lights are lit, (Refer to diagram below), plug in
RV at this time.
Notes
The green Surge Indicator lights tell you the condition of the surge
protector circuits. When the green indicator lights are lit, surge protector is
functional; if not, surge protector is compromised and needs to be replaced.
The four red indicator lights denote the wiring of the power source.
The chart printed on the front of the Surge Protector tells you the
wiring condition based on which lights are lit.
Features
Specifications
Surge Indicator
Weather Resistant
Portable Design Rated at 120/240V/50A
Fuse Protected Joule Rating: 1650J
1 Year Warranty Surge Amps: 45,000
Response Time: <1 NS
Circuit Tester Checks For:
Reverse Polarity
Open Neutral
Open Ground
Line 1 Surge Indicators Line 2
Green Surge Indicator Light
Red Light Number 1
Red Light Number 2
Wiring Configuration
Light 1 on, Light 2 off = Correct Wiring
Light 1 off, Light 2 on = Reverse Polarity
Light 1 on, Light 2 on = Open Neutral
Light 1 off, Light 2 off = Open Ground