manualshive.com logo in svg

Progressive Dynamics PD1200 Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Progressive Dynamics PD1200 Series Скачать руководство пользователя страница 13

 

 13 

Figure 19 

Display Indicators

 

Display Interface 

Select Button 

Figure 17 

Display Panel

 

Display 

Power Button 

Remote Display Port 

Error Code  Condition 

Description 

E-1 

Low battery volt-
age detected 

Input voltage has dropped beneath 10.5V for 
several seconds. The PD1200 Series inverter 
will automatically restart when the input 
voltage reaches 12.0V. 

E-2 

High battery volt-
age shutdown  

Input voltage has surpassed 15.5V. The 
PD1200 Series inverter will automatically 
restart when the input voltage falls below 
15.0V. 

E-3 

AC output over-
load shutdown 

Output power has surpassed the continuous 
power limit or the peak power limit. The 
PD1200 Series inverter will not automati-
cally restart. A manual restart is necessary  

E-4 

Over-temperature 
shutdown 

Internal temperature of the inverter has ex-
ceeded its safe operating limit. The PD1200 
Series inverter will automatically restart 
when internal temperatures return to safe 
operating conditions. 

ERROR CODES 

E-5 

Internal Error 

An internal error has been detected. The 
PD1200 Series inverter will not automati-
cally restart. A manual restart is necessary  

Display Features 



Power Button: Press to turn on; hold to turn off 



Select Button: Cycles between display states:  

 

Input Voltage, Output Voltage, Output  

 

Power, Sleep, Error Code (if applicable) 



Power Indicator: Lights up green when the inverter is on 



Fault Indicator: Flashes red when an error has occurred 



Shore Indicator: Lights up yellow when AC input is detected 



Low Bat Warning Indicator: Lights up red when the battery 
is nearing the end of its charge 



Sleep: Lights automatically dim after 30 seconds 



Remote port for externally mounted display 

Figure 16 

Inverter Display Location

 

Display Panel 

Figure 14 

Error Code Descriptions

 

Figure 18 

Remote Display (optional)

 

Rear Remote Connection 

NOTE: 

For all error codes consult page 16 in the Installation and Opera-

tion Guide for troubleshooting methods 

NOTE: 

Remote display operates exactly the same as the dis-

play mounted to the inverter 

Power Indicator 

Shore Power Indicator 

Low Bat Warning Indicator 

Fault Indicator 

Содержание PD1200 Series

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды