FEATURES
INTEGRATED CHARGE WIZARD
... The INTELI-POWER 9200 Power Converter is the intelligent way to
charge your RV battery. The built-in Charge Wizard
®
microprocessor constantly monitors the battery voltage then
automatically adjusts the converter output voltage to provide the proper charging voltage for fast recharges and
long-term maintenance.
MULTIPLE BATTERY CHARGING
... INTELI-POWER 9200 has the capability of charging multiple batteries
at the same time! They can even charge a combination of different capacity batteries.
GFCI PROTECTION
... INTELI-POWER 9200 has the LOWEST ground fault leakage. With this unit, the user
can confidently utilize the RV's AC outlets without being concerned about a ground fault interruption of the
facilities power source.
REVERSE BATTERY PROTECTION CIRCUIT
... If a battery is accidentally hooked up backwards, the
converter will be protected. Externally mounted ATC type fuses will blow when a battery is connected in reverse.
Replace with same type and rating.
CAUTION
IF THE REVERSE BATTERY PROTECTION FUSES ARE BLOWN DURING INSTALLATION, CHECK
TO SEE THAT THE BATTERY HAS BEEN CONNECTED PROPERLY BEFORE REPLACING THE
FUSES. REPLACE THE FUSES ONLY WITH THE SAME TYPE AND RATING AS THE ORIGINAL
FUSES. USING OTHER FUSES COULD RESULT IN THE CONVERTER BEING DAMAGED,
VEHICLE DAMAGE, INJURY OR OTHER CONSEQUENCES (SEE WARRANTY).
SHORT CIRCUIT PROTECTION
... The "smart" converter, INTELI-POWER 9200, senses, within millionths of
a second, if the output terminals have been shorted. If this condition should occur the converter first limits the
current. Should the condition continue to exist the converter then reduces the current output, within thousandths of a
second. The INTELI-POWER 9200 was designed to protect itself. Once the "short circuit" has been corrected the
INTELI-POWER 9200 will automatically return to normal operating conditions.
THERMAL PROTECTION
... If an over temperature condition should occur due to air flow obstruction or
improper installation, the INTELI-POWER 9200 senses the condition and decreases power output until the unit
returns to normal operating temperature. The converter will return to full output capacity as it cools down.
IGNITION PROTECTION
... All INTELI-POWER 9200 series converters are ignition protected.
INTERNAL COMPONENT COOLING
... The INTELI-POWER 9200 series of converters are equipped with a
variable speed cooling fan. The fan will only run at the speed needed to prevent the converter from overheating and
shutting down. Running the fan at lower speeds where possible will reduce the audible noise generated by the fan
while protecting the converter from excess heat. The location of the fan allows for the maximum cooling of both the
case and components.
OVERVOLTAGE PROTECTION
... If the Input Voltage exceeds a preset limit the converter will shutdown to
prevent damage. The unit will return to normal operation when the voltage returns to normal
The INTELI-POWER series of power converters have undergone tens of thousands of hours of strenuous
engineering testing to insure years of trouble free operation. These converters have been designed and tested to
provide maintenance free operation.
