Assembly Instructions
6
5
Use the Actuator Mount Bracket, Clevis Pin and Cotter Pin from
bag P6 to mount the top portion of the Track Linear Actuator to
your installation. The bottom portion comes with an attached
bracket for installation. The wood screws shown in the diagram
are not included. Tighten until secure.
6
For this step we recommend having at least two people.
From bag P6, use the four M6x25 bolts and washers for the
smaller holes on the outside and the two M10x25 bolts
and washers for the middle holes to mount the
assembled Support Column to the Track Linear Actuator.
Install all of the bolts before tightening to ensure proper
alignment.
Now that your Drop Down TV Lift is assembled you can attach
your TV Mounting Brackets to the TV Support Arms using the
four M8x12 screws. Tighten until secure.
7
Your Drop Down TV Lift is now fully assembled and ready for
use.
8
