REMOTE SYNCING
If you have just bought a new remote or wish to sync an old one, these instructions
will take you through the synchronization process.
Deleting Old Remote Data
1. Unplug the control box
Leave the box unplugged for 30 seconds to allow power to drain from the unit.
2. Turn the box on
The remote should now be un-synced.
Syncing a New Remote
1. Press the S4/Learning Button. The Learning LED should turn to a solid red.
2. Hold down the S4/Learning Button until the LED display flashes rapidly five times.
3. Click each button on the remote until the Display LED flashes rapidly five times.
This means that the sync process was successful. You can now use your remote.
It may take a few seconds for the control box to respond to the remote buttons.
MANUAL CONTROL
Use the wireless remotes provided. Available functions are up/down/stop.
ROCKER SWITCH CONNECTION
Inside the box, there is a terminal used to connect a rocker switch. This terminal
must be connected with a 3-pin connector. The connector is not included with
this control box.
6
Содержание PA-37
Страница 4: ...B Interior 4...
