Page 3
USER’S GUIDE
3-3.
Insert square tube (2pcs)into the holes
of the conjuctive rack, let the stamped lines
on the quare tubes close to the edge of
conjunctive racks.
Screw up the (7) plastic-head screws behind
the conjunctive rack to fasten square tube.
Finally,hang TV brackets (2pcs) on the
square tubes and tighten them by (7) plastic-
head screws. (Stage 3)
3-4.
Screw up (2) hooking tabs (2pcs) to
the upper side of TV back cover by (1) sink
head screws (2pcs).
Hook TV to TV bracket to the corresponding
holes by the tabs. (Stage 4)
3-5.
Screw up TV brackets to the lower end
of TV back cover by (3) round head screw
with (4) washer and (5) pad. (Stage 5)
