progressive automations FLT-01, Руководство пользователя

Страница: 5 / 6

STEP 1
Lay out all the included components and hardware to
ensure you have everything listed on the parts page.
Take the Lifting Column (P3) and place it upside
down. Then slide the Base Column (P2) over the
Lifting Column (P3) until it is fully inserted.
STEP 4
For this step we recommend pre-drilling the included
desktop before attaching it to the Lifting Column (P3).
Turn your assembled desk base right-side up and place
the desktop onto the desk base. Using the six M5x20
Pan Head Wood Screws (P11), secure the desktop to
the desk base. Make sure not to damage the desktop
surface when securing the screws.
STEP 5
Adjust the four Leveling Studs in the Foot (P1)
as needed.
STEP 2
When sliding the Base Column (P2) over the Lifting
Column (P3) make sure to line up the holes in the bottom
of the Base Column (P2) with the holes in the bottom of
the Lifting Column (P3). In order to line up the holes you
may need to adjust the Base Column (P2) a bit until both
holes line up. Secure the Base Column (P2) to the Lifting
Column (P3) with the two M8x16 Machine Screws (P9)
and using the supplied Allen Wrench, tighten the two
screws until secure.
STEP 3
For this step we recommend using two people to
be safe. Turn the Foot (P1) upside down and
place the steel plate in the center over the Base
Column (P2). Secure the Foot (P1) to the Base
Column (P2) with the four M6x16 Machine Screws
(P10). Using the supplied Allen Wrench, tighten
the screws until secure.
Assembly Instructions
5