Progress PAS 8060 E, Руководство пользователя

Страница: 5 / 16

Control panel Indicator
To switch off
Touch and at the same time
The keep warm setting lies between
and . It is used to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the
effective heating surface can be matched to
the size of the cookware.
Before an outside ring can be switched
on, the inside ring must be switched on.
Double ring cooking zone Sensor field Pilot light
To switch on outside ring
Touch for 1-2 seconds
is lit
To switch off outside ring
Touch for 1-2 seconds
goes out
Roasting zone Sensor panel Power indicator
To switch on outside ring
Touch for 1-2 seconds
is lit
To switch off outside ring
Touch for 1-2 seconds
goes out
Locking/unlocking the control panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
Control panel Display
Switch on
Touch (for 5 seconds)
Switch off
Touch
previously set heat setting
When you switch the appliance off, the
locking function is automatically switch-
ed off.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm up function When setting a
heat setting using
, when starting from
, the cooking zone switches to full power
for a certain amount of time and then auto-
matically switches back to the heat setting
set.
Control panel Possible heat settings Display
Switch on (only when
starting at
)
Touch to (after 5 seconds)
Switch off
Touch to / to
Not used
Touch to to
If during the automatic warm up a
higher heat setting is selected, e.g. from
to , the automatic warm up is ad-
justed.
If there is still residual heat on the cook-
ing zone (display
), the automatic
warm up is not performed.
The length of time that the automatic warm
up function operates depends on the heat
setting selected.
progress 5