Progress Lighting AirPro P250076 Скачать руководство пользователя страница 2

Lifetime Limited Warranty

Date Purchased

Store Purchased

UL Model No.

Serial No.

Vendor No.

UPC

111017

Progress Lighting fan motors are warranted to the original purchaser to be free of electrical and/

or mechanical defects for so long as the original purchaser owns the fan. Pull chain switches, reverse 

switches, capacitors and metal finishes are warranted to be free from defects in materials or workmanship 

for a period of 1 year from the date of purchase. Warping of wooden or plastic blades is not covered by 

this warranty nor is corrosion and/ or deterioration of any finishes for fans installed within ten miles of 

any sea coast. Extended warranties for ENERGY STAR® qualified products may apply.

Progress Lighting ceiling fans with built-in LED light sources, when properly installed and under normal 

conditions of use, are warranted to be free from defects in material and workmanship which cause the 

light sources to fail to operate in accordance with the specifications for (i) five (5) years from the date of 

purchase on the LED Light modules and electrical components for fans used in single family residences, 

and (ii) three (3) years from the date of purchase on the LED Light modules and electrical components 

for fans used in multi-family or commercial applications. LED bulbs supplied by Progress Lighting carry 

no warranty other than manufacturer’s warranty. Non-LED bulbs carry no warranty.

With proof of purchase, the original purchaser may return the defective fan to the place of purchase 

during the first 30 days for replacement. After 30 days, the original purchaser MUST contact Progress 

Lighting at (864) 678-1000 for repair or replacement which shall be determined in Progress Lighting’s 

sole discretion and shall be purchaser’s sole and exclusive remedy.

Labor and Shipping Excluded. This warranty does not cover any costs or fees associated with the labor 

(including, but not limited to, electrician’s fees) required to install, remove, or replace a fan or any fan 

parts.

This warranty shall not apply to any loss or damage resulting from (i) normal wear and tear or alteration, 

misuse,  abuse  or  neglect,  or  (ii)  improper  installation,  operation,  repair  or  maintenance  by  original 

purchaser or a third party, including without limitation improper voltage supply or power surge, use of 

improper parts or

accessories, unauthorized repair (made or attempted) or failure to provide maintenance to the fan.

THE FOREGOING WARRANTIES STATE PROGRESS LIGHTING’S ENTIRE WARRANTY 

OBLIGATION AND ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY RELATED 

TO SUCH PRODUCTS. PROGRESS LIGHTING IS NOT RESPONSIBLE FOR DAMAGES 

(INCLUDING INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL), DUE TO PRODUCT 

FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, 

OR OTHERWISE. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, 

WHETHER EXPRESSED OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY, FITNESS 

FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitations

of incidental or consequential damages, so the above limitations and exclusions may not apply to you. 

This warranty gives you specific rights and you may have other rights which vary from state to state.

P250076

785247264919
785247264896
785247264902

Содержание AirPro P250076





























Отзывы: