progeo EASY TILT, Руководство пользователя

Страница: 13 / 56

Easy Tilt 13
Reclining the backrest
Thanks to the three detent holes on the support
C , you can adjust the backrest angle (95°, 105°, 115° with respect to the seat) without using any tool.
To change the inclination of the backrest, pull the cord A (as explained above in the section “folding the backrest”) and slowly swing the backrest until both lock ing pins B secure the system in one of the other two
detent holes on the support C, after the cord has been released.
If you adjust the backrest angle with the occupant sitting on the wheelchair, take care to prevent the occupant from sliding off the seat.
The block F prevents the backrests from falling backward in case the pin B , for any reason, does not lock into any head detent holes.
NEVER use the wheelchair continuously with the backrest leaning on the block F.
The backrest must be fixed using the head detent holes.