Document Number: MAN0045
Issue: 4.01
Page
6
of
16
USER MENU
The User Menu is access by entering * followed by the User Password. The default for this is 654321.
Users Menu #
Description
Default Value
* 00
User Password
6 5 4 3 2 1
* 01
Access Code
None
* 02
Discover Presented Cards
-
* 03
Forget Presented Cards
-
* 04
Add Card by Number
-
* 05
Remove Card by number
-
USER PASSWORD
Passwords are the means by which the
systems operator gains access to the
Programming functions. This is a 6-digit
number and can be changed by using the
following procedure.
Changing the user password
This example shows the password
changed to 234567.
Default Value:
654321
The factory default can be restored by a
“Full Reset” or by connecting the PWR
input to 0V for 4 seconds.
Related Engineers Menus:
00 “Engineers Password”
ACCESS CODE FUNCTIONS
The P1 Stand Alone controller has a single
access code that can be programmed. The
access code can be any number of digits
from 1 to 8. The access code is only active
when the keyboard is in:
Normal Keyboard Mode
Card & Code Mode
See Engineers Function 20 for more details
If more than one access code is needed
see “Virtual Card” modes for the keyboard.
REMOVING ACCESS CODES
Engineers’ function 98 will erase the
access code.
Status LED will Flash
Enter User Password
* 6 5 4 3 2 1
Single Access Code
* 0 1
Status LED will stop Flashing
Complete & Exit Programming Mode
#
Enter the required Access Code
1 2 3 4
Status LED will Flash
Enter User Password
* 6 5 4 3 2 1
Select User Password menu
* 0 0
Status LED will stop Flashing
Complete & Exit Programming Mode
#
Enter the new Password
2 3 4 5 6 7
Enter the new Password again
2 3 4 5 6 7
