4
Industrial Fan Forced Heater
SAVE THESE INSTRUCTIONS.
CAUTION:
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
PET OWNERS WARNING:
The health of some small pets including birds are extremely sensitive
to the fumes produced during the first-time use of many appliances. These fumes are not harmful
to humans but we recommended that you do not use your heater around birds and small pets
during its initial use until the manufacturing corrosion coatings burn off.
WARNING:
NOT FOR HOUSEHOLD USE. THIS IS A FLOOR HEATER ONLY.
RISK OF FIRE, DO NOT USE AS A RESIDENTIAL OR HOUSEHOLD HEATER
15. It is normal for the heater's plug and cord to feel warm to the touch. A plug or cord which becomes
hot to the touch or becomes distorted in shape may be a result of a worn electrical outlet. Worn
outlets or receptacles should be replaced prior to further use of the heater. Plugging heater into a
worn outlet/receptacle may result in overheating of the power cord or fire.
16. Ensure the heater is on a stable, secure floor surface to eliminate the potential of tipping it over.
17. Be sure that the plug is fully inserted into appropriate receptacle. Please remember that receptacles
also deteriorate due to aging and continuous use: check periodically for signs of overheating or
deformations evidenced by the plug. Should this occur, do not use the receptacle if deteriorated.
CALL your electrician.
18. Check that neither the appliance nor the power cable has been damaged in any way during
transportation.
19. Make sure that no pieces of polystyrene or other packaging material have been left between one
element of the appliance and another. It may be necessary to pass over the appliance with a vacuum
cleaner.
20. When switching on the appliance for the first time, you may notice a slight odor which is normal with
new electrical appliances. Allow odor to dissipate by running appliance at full power for about ten
minutes. Make sure that the room in which the appliance is located is well ventilated during this
operation. This heater draws 23.3 Amps during operation. To prevent overloading a circuit, do not
plug the heater into a circuit that already has other appliances working.
21. Do not run in locations when the heater will be left unattended for long periods of time. (For example
- in an unoccupied summer cottage).
22. Do not use attachments or filters. They are not recommended.
23. Always plug heater directly into a wall outlet/receptacle. Never use with an extension cord or
relocatable power tap (outlet power strip). A heater has hot and arcing or sparking parts inside. Do
not use it in areas where gasoline, paint, or flammable liquids are used or stored.
24. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or
flammable liquids are used or stored.
