11
WARNING -
The heater must be properly installed before it is
used.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR
ARC FLASH :
Apply appropriate personal protective equipment (PPE)
and follow safe electrical workpractices. See NFPA 70E.
A circuit breaker must be installed and serviced only by
qualified electrical personnel.
Always use a properly rated voltage sensing device to
confirm power is off.
The switch on the heater is to start the Fan and Heater.
Use the circuit breaker as power ON/OFF device. The
circuit breaker is to be installed by certified electrican
and shall be located in line of sight from the heater
location or shall be capable of being locked in open
position. Follow the operating instruction to reduce
the risk of fire, electric shock, injury or death to
persons.
Switch on the circuit breaker to turn on the heater power.
Press the switch at the back of the heater to turn on the fan
and heating function.
To turn off the heater,
press the switch turn off the fan and
heating function. And then
switch off the circuit breaker.
The circuit breaker serves as the power
disconnection means.
OPERATING INSTRUCTIONS
