6
1)The unit
OPENING INSTRUCTIONS
1. Carefully remove the heater from carton and the bag. Make certain the unit is in the OFF
position before plugging the heater into the power outlet.
2. Before using the heater, make sure that it is on a flat and stable surface. Damage may occur if
it is placed in an incline or decline.
3. Turn off all the controls of the heater, and then plug the heater power cord directly into a
standard grounded AC outlet. Be sure plug fits tightly into outlet.
4. Set the selector switch to desired position. Use High setting to raise the temperature quickly.
Once the room is comfortable, select a lower power setting to prevent the room from becoming
too warm.
5. This model is equipped with an oscillation feature. If you want to obtain a wider area of heat
circulation, press button for oscillation function.
6. To completely shut the heater off, turn all the controls to OFF, and remove plug from the
socket-outlet.
Power light remains on when the heater power supply cord is plugged into an electrical outlet
and operated well.
This unit has FAN only setting which helps you to cool down the unit before you turn it off.
MAINTENANCE
1.
Turn the selector
switch to OFF position.
2.
Unplug the unit and let it cool completely.
3.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquid enter the heater.
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to
clean the heater. This may cause damage or deterioration to the surface of the heater.
5.
DO NOT immerse the heater in water.
6.
Wait until the unit is completely dry before use.
7.
Air filter needs cleaning after used 3 months of use. Please take off the filter with the 2
steps in the drawing below. Flush and clean the filter with water, then dry it out and re-
assemble.
2) Remove Air filter
