Profoto AirRemote TTL-C, Руководство пользователя

Страница: 16 / 24

Air
R
emo
te TTL
-C
16
www.profoto.com
Other
Factory reset
Reset the Air Remote TTL-C to factory settings:
•
Switch off the Air Remote TTL-C.
•
Press and hold down the C button [4] and the ON button [1]
simultaneously.
Battery check & built-in power saving
The low battery symbol is displayed when the battery voltage reaches
a critical level.
To save battery, the display is partially dimmed after 20 seconds of
inactivity. Turns inactive after 2 minutes of inactivity. Press the ON
button [1] to switch on the display. The display also switches on when
any of the function buttons are used.
Check Firmware
Press and hold the MODE button [6] for 10 seconds when the remote
is turned on.
Upgrade Firmware
We recommend that you look for firmware upgrades before you start
using your new Air Remote TTL-C.
To access the latest free upgrades you create your personal account on
profoto.com/myprofoto. Once you have an account you can register
your products and be sure you get noticed when new upgrades are
released.
Upgrade of firmware is made via the USB port [13] on the remote,
following the instructions provided in the upgrade application
downloaded from profoto.com/myprofoto. You can always contact
your local dealer or distributor for professional service.