Profoto Air Remote TTL-N, Руководство пользователя

Страница: 12 / 20

AIr Remote TTL-N
12
www.profoto.com
The figure shows the Display [2] when:
• TTL mode, 1st-curtain sync and channel 1 are selected.
• Group C is selected to be adjusted.
• The relative light output from lights in group A is set to 2.5 f-stops more than lights in
group C. (A to +1.5 f-stops and C to -1.0 f-stops).
• Lights/Heads in Group B are turned off.
• The modeling light is turned on in both group A and C.
NoTe:
• If only one flash group is used in TTL mode, the relation value will not have any effect on the total flash exposure
as the flash exposure is automatically set by the camera.
• If flashes without Profoto AirTTL support are used in combination with Profoto AirTTL flashes in TTL mode, the
flash outputs of the non-TTL flashes are added to the total flash exposure. Such flashes can for instance be used to
manually set the exposure on the background.
• If a Profoto AirTTL compatible flash is set to group D, E or F, it will be synchronized but not be part of the TTL
calculation. The flash outputs of these flashes are added to the total flash exposure and can for instance be used to
manually set the exposure on the background.