Profort vibraSpot, Руководство пользователя

Страница: 2 / 3

www.profort.com ver. 3.01
vibraSpot
Seismic detector
Function
vibraSpot is a wireless detector, which contains a seismic sensor. The seismic sensor reacts to vibra-
tions and it is possible to adjust the sensitivity of the seismic sensor on the central unit. The unit is
supplied with an internal battery.
Assembling:
vibraSpot must be placed as high as possible. Preferably so that the antenna is placed either in the
right or left corner of the object, which it is placed on. Note that the end of the antenna must not be
hidden behind metal or reinforced concrete. This considerably limits the reach of the antenna.
The detector is installed by means of double-sided tape or through the hole
Service and maintenance:
Every 6 month a check must be made whether or not the detector can be activated. This can be done
either by shaking the detectors or removing the enclosed magnet. Then it must be checked whether an
alarm has been registered from the detector on the central unit. If the detector doesn’t work the bat-
tery is exchanged. If it still doesn’t work, the entire detector is exchanged.
Specifications:
Dimensions: 79 x 39 x 9 mm
Weight incl. internal battery: 25 g
Radius of wireless signal: Up to 1000m by exterior
measurement.
Power supply: Battery
Battery life span: approx. 5 years
Temperature: minus 10
o
to plus 55
o
Celsi-
us
Spare parts and accessories:
Detector, 868MHz: Profort number 004320
Battery: Profort number 004029
Double-sided tape 2x5cm: Profort number 299003
Operating manual Profort number 104015
To obtain the correct sensitivity on the seismic sensor the detector
must not be installed with a down-pointing antenna.
The detector’s battery is exchanged
by loosening the two screws at the
back of the detector. The battery is
loosened carefully by the fingers.
Hereafter the new battery is put in.
Note that the antenna must be
placed so that it is not squeezed
when the cover is installed.