QUICK GUIDE for Piccolo Light/multiGuard Master RF
Ver. 1.03
www.profort.com
Pg.
1
Installation
1.
Piccolo Light/multiGuard Master RF can be installed without using communication via the mobile
network, but if a SIM card is installed in the unit you will be able to receive alarms as text message
and email. You will also be able to perform set-up and service via the Profort web-service or via
your mobile phone.
2.
Prepare a SIM card so that the PIN code is 1234 or deactivated and test if text messages can be sent
or received. Mount the card in the unit. The unit now has password 1234 or runs without a password.
The card is inserted as shown below.
3.
Mount the unit near the security staff and as high and free as possible (never in a steel cabinet).
4.
Connect inputs, outputs and power cable (230V/12-24V AC/DC). If necessary a rechargeable 9V
battery.
5.
Turn on the power. A lengthy ’beep’will sound and the display shows: ”BUSY…” After approx. 20
secs. 4 ’beeps’ will sound. The display now shows: ”NO ALARMS”.
Piccolo Light/multiGuard Master RF interior
DIP-switch for analog input
1 ON:
0-10 VDC
2 ON:
0/4-20 mA
3 ON:
PT-100
4 ON:
Profort temp. sensor
All OFF:
digital input
Voltage
Output:
AC max. 230 VAC, 6A
DC max. 30 VDC, 6A
Input, digital: max. 24 VDC
max. power 2 mA
Input, analog: max. 0-10 VDC
Only connect voltage when
DIP-switch 1 is on, og 2-4 are
off