QUICK GUIDE for multiGuard® DIN9 3G
Ver. 4.03
www.profort.com
Pg.
1
Installation
1.
Prepare a SIM card so that the PIN code is 1234 or is deactivated. Mount the card in the unit. The
unit now has password 1234 or runs without a password. The card is mounted as shown below.
2.
Connect inputs, outputs and power cable (230V/12-24V AC/DC). If necessary a rechargeable 9V
battery.
3.
Turn on the power. A diode is lit. After approx. 60 secs. the diode flashes approx. every 2 secs. and
the unit is ready.
multiGuard DIN9 interior
DIP-switch for analog input
1 ON:
0-10 VDC
2 ON:
0/4-20 mA
3 ON:
PT-100
4 ON:
Profort temperature sensor
All OFF:
digital input
Voltage
Output:
AC max. 230 VAC, 6A
DC max. 30 VDC, 6A
Input, digital: max. 24 VDC
max. power 2 mA
Input, analog: max. 0-10 VDC
Only connect voltage when the
DIP-switch 1 is on, and 2-4 are
off
