www.profort.com
ver. 4.01
inSpot
Active detector with input
Function:
inSpot is a wireless active detector containing two pieces of inputs. The analog
input is not used. If the input is activated or de-activated, an alarm is registered.
One of the input sends a sabotage alarm and the other one a general alarm.
The unit can be supplied with an internal battery or an external power supply.
The detector is used to interface between an external sensor and the wireless
system, e.g. PIR-detector, magnet detector, gas detector, pontoon, etc. The
external sensor is only connected to the input to give a general alarm. If a
sabotage alarm is wanted, the external detector’s sabotage port is connected
only to the input to give a sabotage alarm.
Assembly:
inSpot must be placed as high as possible. Preferably so that the antenna is not
“hidden” behind metal or reinforced concrete. This considerably limits the reach
of the antenna. The detector is installed by means of a screw going the whole
way through (see diagram).
The screw is screwed the whole way through the back wall in the box. If an
external detector is connected, a small hole is made to the cable in the side of
the box wall.
Service and maintenance:
Every 6 month a check must be made whether or not the detector can be
activated. This can be done by activating both input relays. Additionally, the
sabotage alarm should be tested by activating the sabotage button and alarm by
cutting off the power.
Then it must be checked whether an alarm has been registered from the detector
on the central unit.
If the detector doesn’t work the battery should be changed. If it still doesn’t
work, the entire detector should be changed.
The detector’s battery is changed by loosening the screw at the back of the
detector. The battery is loosened carefully. Hereafter the new battery is put in.
Note that the battery must be placed so that it is not squeezed when the cover is
installed. See diagram.
Specifications:
Dimensions:
100 x 50 x 25 mm
Weight incl. internal battery: 60 g
Radius of wireless signal of
868MHz:
Up to 1,000m by exterior measurement
Power supply:
Battery
Battery life span:
Approx. 3 years
Temperature.
Minus 10° to plus 55° Celsius
Spare parts and accessories:
Detector 868MHz:
Profort number 007560
Internal battery:
Profort number 007560
Operating manual:
Profort number 107010
